Parametric Design
Parametric 2020
以 Loft 曲面建立椅子的基本形體,再將曲面切片轉換為連續排列的板材構件。系統加入拉伸功能,使各片板材沿排列方向逐步拉開,並依照板材之間的距離變化,計算連接桿件在各板材上的位置、移動方向與所需伸縮量,藉此研究椅體由收合到展開時的構件關係與連接方式
The basic form of the chair was created from a lofted surface, then sliced into a continuous series of sheet components. An expansion function was added to gradually spread the slices apart along the direction of the assembly. As the spacing changes, the system calculates the position, movement direction, and required extension of the connecting rods at each slice, allowing the component relationships and connections to be studied as the chair transitions from a compact to an expanded state.
Parametric 2021
以 Grasshopper 建立一套格柵配置方式,透過指定格柵數量、寬度與間距,控制整體排列範圍與密度。在基本尺寸條件確定後,再加入隨機變化,使各格柵在既定限制內產生不同的排列結果
A parametric screen system built in Grasshopper, using defined quantities, widths, and spacing to control the overall range and density of the layout. Once the basic dimensions are set, randomized variation is introduced so that each element can shift within a controlled set of constraints.
Modeling 2021
建立一座以鋼板為主要結構、外覆乾掛石材的弧形樓梯模型。依照樓梯的連續曲率建立整體幾何,並將外覆石材拆分為可製作的分割單元,模擬曲面轉換為實際板材後的尺寸、接縫與對縫關係
模型進一步整合踏階、側板、石材包覆與玻璃扶手,檢視不同構件沿弧形路徑銜接時的幾何關係與收邊方式。最終建立包含主要結構、飾面分割與扶手系統的完整 3D 模型,作為造型與構造細節的整合驗證
A curved staircase model developed with a steel plate structure and dry-hung stone cladding. The overall geometry follows the continuous curvature of the staircase, while the stone cladding is divided into manufacturable panels to study dimensions, joints, and alignment as the curved surface is translated into actual stone components.
The model further integrates the treads, side plates, stone cladding, and glass balustrade to examine how different components connect and terminate along the curved path. The final 3D model brings together the primary structure, cladding divisions, and balustrade system to verify the overall form and construction details.
Parametric 2021
此為建照圖面積計算與標示所建立,依照不同幾何形狀採用兩種量測方式
可分割的規則形先拆分為矩形、梯形與任意三角形,其中三角形利用海龍公式計算面積。系統會自動標示各區塊編號與邊長,計算各部分面積,並依序列出對應的計算式。無法以直線幾何合理分割的不規則弧形,則採用數格子的方式,以固定網格估算面積並取得接近值
Developed for area calculation and annotation in building permit drawings, using two different measurement methods depending on the geometry.
Regular shapes that can be subdivided are broken down into rectangles, trapezoids, and arbitrary triangles, with Heron’s formula used for triangle areas. The system automatically labels each region with its number and edge lengths, calculates the individual areas, and generates the corresponding formulas in sequence. Irregular curved areas that cannot be reasonably subdivided with straight geometry are estimated using a fixed grid to obtain an approximate value.