Parametric Design

Year 2023-2025
Type Parametric

Parametric 2023

以Grasshopper建立基地、臨路水溝與道路高程的檢討工具,將測量取得的高程資料轉換為多組基地短向剖面,同時標示各控制點高程與區段坡度

透過比較原始高程與調整後高程,可直接檢視基地與道路、水溝之間的銜接關係,並依排水方向與坡度需求調整基地高程。調整結果同步反映至各剖面,使不同方案的高程差異與坡度變化能夠快速比較

A Grasshopper tool developed to study the relationship between site elevations, roadside drainage channels, and road levels. Surveyed elevation data is converted into a series of cross-sections across the site, with control-point elevations and sectional slopes displayed directly on each section.

By comparing the original and adjusted elevations, the relationship between the site, road, and drainage channels can be reviewed directly, while site levels can be adjusted according to drainage direction and slope requirements. Changes are reflected across all sections, allowing different elevation schemes and slope conditions to be compared quickly.


Parametric 2024

以Grasshopper建立景觀地坪的地磚配置系統,依照設定的顏色種類與數量比例,將不同色階的地磚分布於基地鋪面範圍內,在維持整體比例的同時產生較自然的隨機變化

針對嵌入地坪的圓形公共藝術區域,另外建立局部配置條件,模擬不同顏色比例向外圍鋪面分布的結果。透過調整各色地磚的比例與分布範圍,可快速比較不同配置方案,並同步控制實際所需的各色地磚數量

A Grasshopper system developed to distribute landscape paving tiles according to defined color types and quantity ratios. Different shades are distributed across the paved areas with controlled randomness, maintaining the overall proportions while producing a more natural variation.

For the circular public artwork embedded in the pavement, additional local distribution rules were created to simulate how different color ratios extend into the surrounding paving. By adjusting the proportion and distribution range of each tile color, different layouts can be compared quickly while keeping track of the required quantities for each color.


Parametric 2025

以Grasshopper建立初期建築量體檢討工具,將基地範圍、退縮線、建蔽率與容積率等條件轉換為直觀的視覺資訊。調整建築平面與量體時,可即時計算使用建蔽面積與容積,並顯示目前使用比例,快速比較不同量體配置

系統亦可依檢討需求建立警告規則,例如建築超出基地退縮範圍、平面面積超過允許建蔽面積,或其他可量化的設計限制。當條件超出設定值時,直接以顏色與數值提示,使初期量體調整與問題判讀能在同一個模型中進行

A Grasshopper tool developed for early-stage building massing studies, translating site boundaries, setback lines, building coverage ratio, and floor area ratio into intuitive visual information. As the building footprint and massing are adjusted, the system calculates the current building coverage and floor area in real time, displaying their usage ratios for quick comparison between different configurations.

Custom warning rules can also be defined for specific design constraints, such as a building extending beyond the setback boundary, a footprint exceeding the permitted building coverage, or other measurable limits. When a condition exceeds its defined threshold, the model provides immediate visual and numerical feedback, allowing massing adjustments and constraint checks to take place within the same model.